 |
INTELLECTS
Software
Lane Systems Module
Plaza Systems Module
Real Time Management Systems Module
Head Quarter Systems Module
Hardware
Lane Computer Systems
Automatic Lane Barrier
Automatic Vehicle Classification
Manual Lane Barrier
Toll Booth
Approach Traffic Light
Toll Information Point
Receipt Printer
Revenue Control Terminal
Contactless Smart Card Reader
Central Lane Equipment
PARCS
CCHS
Point Of Sale
Contactless Smart Card Time Recorder
Access Control System
|
|
|
|
Automatic Vehicle Classification
The Automatic Vehicle Classification
(AVC) refers to the various components and processes
of the toll collection system with which the toll equipment is
able to determine the classification of the stipulated vehicle
type for the purpose of charging appropriate toll to the customer.
According to the Malaysian Highway Authority (MHA) vehicle are
classified as Class-1: Private Car, Class-2: 2-axle lorry, Class-3:
Lorry with 3 or more axle, Class-4: Taxi and Class 5:Bus. However
certain high operator may have a completely different classification.
In a manual toll collection system, the AVC is used to verify
the classification assigned by toll-teller as the vehicle is being
charged.
Treadle
|
Items
|
Specification
|
| Model |
DYNAX AS439 |
| Type |
IRD DYNAX Unibody Treadles with Pressure
Sensor
Unibody Treadles |
| Warranty |
5 Million axle hits |
| Operating Temperature |
-29 to +71 °C |
| Accuracy |
99.25% |
| Other Features |
- High strength steel single piece
structure
- Shallow body depth for low profile installation
- Bridge deck installation
- Convenient and less maintenance cost and support
- Fewer spare parts
- T-Shape inverted locking mechanism
- Better finishing with epoxy grout or concrete |
Optical Light Barrier
|
Items
|
Specification
|
| Sensor Models |
BANNER MINI-ARRAY BMEL 4216A Emitter
and BMEL 4216A Receiver |
| Emitter/Receiver Range |
0.9 to 17 m (3 to 55 ft) |
| Total Beams |
56 |
| Indicator |
Emitter: RED LED light for proper
operation
Receiver: GREEN = sensor aligned (>3x excess gain)
YELLOW = Marginal alignment (1x<excess<3x)
RED = Sensors misaligned or beam(s) blocked |
| Power Requirement |
12V dc ± 2% supplied by controller |
| Construction |
Aluminium with black anodized finish;
acrylic lens cover
Rating - NEMA 4, 13 (IP 65) |
| Operating Temperature |
-20 °C to 70°C |
| Maximum Relative Humidity |
95% (Non-condensing) |
| Connections |
Sensors connect to controller using
two 5 conductor quick disconnect cables (one for emitter and
one for receiver). Use Banner cables, which incorporate a "twisted
pair" for noise immunity on RS485 data communication lines.
Cable measure 0.32" (8.1mm) in diameter and are shielded
and PVC-jacketed. Conductors are 20-gauge. Emitter and receiver
cables may not exceed 250 feet each. |
Copyright©2004. Hopetech Sdn. Bhd. All Rights Reserved.
|
|
